Amsoil Synthetic Oil Dealer

 

Motor Oil Diesel Oil Motorcycle Oil Power Sports Oil Gear Lubes
Transmission Fluid Hydraulic Oil Compressor Oil Grease Filters 
By-Pass Filters Fuel Additives Maintenance Wiper Blades Plugs-Wires 
Appearance Amsoil Literature Clothing and Promotional Service Home
 
<< Previous    1...   3  4  [5]  6  7  ...8    Next >>

Royal Purple 

Here's a letter concerning Royal Purple from AMSOIL Tech.

 

Originally, AMSOIL wrote this to answer a question concerning why we don't include RP in our comparisons.

 

As you may know, RP is big in racing circles.  The chemistry they use is something we choose not to use.  One of our big selling points is extended drain intervals.  Some additive chemicals can cause adverse conditions when used for long periods.

 

Royal Purple uses a different chemistry than most.  They are one of only a handful of marketers using Moly in their oil. Moly is a solid, specifically banned by Cummins, due to excessive valve train wear.

 

Moly (Molybdenum Disulfide) is a processed mineral that is similar in appearance to graphite. Moly has good lubricating properties when used either by itself (in dry power form or as an additive to oil or other lubricants). Particles of the Moly can come out of suspension and agglomerate. This can actually clog oil filters or oil lines and the rest normally settles in the bottom of the oil pan. This seems to be more likely when using extended drain intervals. The only test we ran on RP involved their 20W50 Racing oil versus our AMSOIL Series 2000 Synthetic 20W50 Racing Oil (TRO).

 

We ran two 4 ball wear tests with different parameters, a spectrographic baseline, FTIR scan and volatility tests.  The Royal Purple showed a significantly high volatility rate with a 12.51% boil off rate.

 

This compares to TRO with a 4.47% volatility rating.  Wear scars were also smaller with the TRO.  For example the TRO left a .41mm scar and the RP oil left a .66mm scar.  There was also a surprising difference in the viscosity index.  The RP has a VI of 129 versus 155 for the TRO.  The higher the VI, the better the viscosity stays in place at high temperatures. 

 

Royal Purple products are more popular in some areas than others, but generally they own a very small segment of the lubricant market. Advertising against small companies actually gives them advertising in the process and gives little in return.  Therefore, we target our advertising against the industry giants that are household names.

 

We hope this is helpful.

 

 

 

<< Previous    1...   3  4  [5]  6  7  ...8    Next >>